KG Series Relay Timer
The KG series chassis mount relay timer is a self-contained delay unit that includes an on-board relay and timer module. The circuit board, with attached standoffs, can be mounted to a chassis in minutes. 1/4" quick-connect blade connectors provide the external wiring connections making installation simple and fast.
The KG relay timer is configured with either an adjustable or preset timer. A wide selection of input voltages and timing options is available.
• Standoffs for Chassis Mounting
• Heavy Duty Long Life Relay
• 1/4" Quick Connect Terminals
• On Board Timer Adjustment
• Timing from .1 Second to 300 Seconds
• Thick Film Hybrid Timer
Table 1. Part Number Selection
Timer Action
(1) On Delay
(2) Off Delay
(3) Interval Delay
Timing Range
Standard:
(1) .1 to 10 second
(2) .5 to 5 second
(7) 3 to 30 second
(4) 30 to 300 sec.
Nonstandard:
(5) 1 to 10 second
(3) 5 to 50 second
(8) 6 to 60 second
(6) 12 to 120 sec.
(0) *Special Time
*Customer defined
Input Voltage (AC or DC)
Standard:
(2) 24 VAC
(1) 120 VAC
(8) 12 VDC
(4) 24 VDC
Nonstandard:
(7) 12 VAC
(5) 240 VAC
(6) 48 VDC
(3) 110 VDC
KG Relay Order Code Example
Interval Delay:
KG 3 7 1
(3) Interval Delay
(7) 3 to 30 sec.
(1) 120 Volt AC
KG Relay Order Code Example
Off Delay:
KG 2 3 8
(2) Off Delay
(3) 5 to 50 sec.
(8) 12 Volt DC
Options. Fixed and special time delay ranges from .05 second to 10 hour.
Wiring Diagrams: Top view of modules.
Input Current
Idle (Actions 2 and 3 only) = 4 ma.
Operating = 2 VA.
Control Switch (Action 2 only) = 4 ma.
Output Relay
DPDT Contacts Rated:
10 Amps resistive or 1/3 HP @ 120 VAC
Operating Parameters
Repeat Accuracy:
Fixed Conditions = ±3%, ±1 cycle for AC units.
Overall variation = ±10%
Input voltage range:
±10% for AC units
±10% @ 20% max. pp. ripple for DC units
Temperature range:
-10º to 70º C operating
-20º to 85º C storage
Reset time:
Action 1 = 50 ms.
Actions 2 and 3 = 150 ms.
Initiate time (Control Switch):
Action 2 = 50 ms.
Size
2.1" Square x 1.8" High
Termination
1/4" Quick Connect Terminals
